Samo Penič Apps

Program allows to enter/leave camera debugmodeon some Pentax cameras. It was tested on Pentax K10D, but mayalsowork in newer models. Debug mode allows entering focuscorrectionfor camera bodies that have front- or back- focusissues.This program is meant for demonstration of the technique only.Itdoesn't do many checks and may fail if not all prerequisitiesaremet. Those are:* Your Android device has USB OTG support buit in* Your Android device IS ROOTED* The camera is connected to your Android device via USB OTGcableand cable provided with your camera* The camera is turned onAfter all the requrements are met, click "Debug on" or "Debugoff"button. You might be asked to allow root privileges fortheprogram. Select "Allow". Wait a second or two. You may seecameralcd flash. Turn off the camera and disconnect it from yourAndroiddevice. Turn on the camera. You will be in debug mode (orthe debugmode will be disabled, depends on the button youclicked).The code is based on open source project pkTriggerCord andsomeadaptations to it were done by me.Disclaimer: USE AT YOUR OWN RISK. I WILL NOT BE HELDRESPONSIBLEIF YOUR CAMERA OR YOUR ANDROID DEVICE STOPS WORKINGOREXPLODES!Please leave a comment if it works with your camera.The source code of modified pkTriggerCord is availableat:https://github.com/samop/pktriggercord